Best Way to Remove Wrinkles from Plastic Tablecloths
To get wrinkles, creases, or fold lines out of disposable plastic table covers, use a hair dryer 8 inches above the plastic tablecloth. Avoid applying heat in one area. Move it back and forth until the wrinkles smooth out. This is the easiest and fastest way to get rid of wrinkles ensuring your plastic tablecloth looks pristine and ready for any occasion.
Table of content
Can You Unwrinkle Plastic Tablecloths?
✅ Yes, you can remove wrinkles on plastic table covers. You can treat the material with heat and it will unwrinkle quite quickly.
Hang and Air Dry
Air drying is a straightforward yet effective method for removing wrinkles from plastic tablecloths. By allowing the fabric to hang freely and air out, you can naturally release creases and wrinkles, leaving your tablecloth looking crisp and smooth. However, this isn’t an immediate solution and could take anywhere from a few hours to a full day. Not recommended if you are in a hurry.
What You'll Need:
1. A clothing rack
2. A plastic table cover
How to Air Dry to Get Wrinkles Out of Plastic Tablecloths?
- Start the wrinkle removal process at least a day before your event.
Hang the tablecloths on a clothesline or any suitable hanging apparatus.
Allow gravity and airflow to naturally work out the wrinkles and creases.
Begin this process two days prior to ensure ample time, especially if dealing with multiple tablecloths.
Hair Dryer Method
The fastest way to get rid of wrinkles out of plastic tablecloths and PVC tablecloths is to use a hair dryer. This is the most efficient way of getting creases out of plastic table covers. However, you need to be careful and make sure you don’t melt the tablecloth.
Generally, using a hair dryer on a low-temperature setting from about 8 inches above the plastic tablecloth while gently moving it back and forth can help smooth out wrinkles relatively quickly. Depending on the size of the tablecloth and the number of wrinkles, you can expect this method to take anywhere from a few minutes to around half an hour.
What You'll Need:
- A hair dryer
- A disposable plastic tablecloth or PVC tablecloth
- Flat surface
How to Use a Hair Dryer to Get Wrinkles Out of Plastic Tablecloths?
- Use a hair dryer with a low-temperature setting.
Hold the dryer approximately 8 inches above the cloth.
Gently move the hair dryer back and forth over the tablecloth while smoothing out the fabric with your hand.
Avoid excessive heat or proximity to prevent damage to the tablecloth.
This method works best with an extra set of hands to assist in smoothing out wrinkles as you apply heat.
Use an Iron
Steam treatment is another highly effective method for treating stubborn wrinkles in PVC tablecloths and disposable plastic tablecloths. However, be careful to avoid burns when working with the hot towel and iron. The time required for steam treatment depends on factors such as the size and thickness of the tablecloth, as well as the severity of the wrinkles. Steam treatment can take anywhere from several minutes to around half an hour.
What You'll Need:
1. An iron
2. A towel
3. Flat surface
How to Use an Iron to Get Creases Out of Plastic Tablecloths?
- Place a warm, damp towel over stubborn wrinkles.
Smooth out the towel with a hot iron, causing it to generate steam.
The steam will penetrate the plastic table cover, loosening up the wrinkles.
Exercise caution to avoid burns while working with the hot towel.
Do These Methods Also Work on PVC Tablecloths?
Yes, you can use a hair dryer, an iron, or air dry PVC tablecloths to get rid of wrinkles. These methods involve applying heat to loosen up the plastic which smooths out the creases and the fold lines.
How to Store Plastic Tablecloths?
To make sure you don’t have to go through the hassle again, it’s best to store your plastic tablecloths properly. This will save you a lot of time and cut down on the stress of setting up an event.
After removing wrinkles, store the tablecloth properly to prevent future creasing.
Roll the tablecloth instead of folding it to minimize the risk of wrinkles reappearing.
Store in a cool, dry place until ready for use.
Overall
The easiest and fastest way of getting rid of wrinkles on plastic is to use some form of heat treatment. This can either be either the steam of the iron or the heat of a hair dryer. If you've got some time, you can also put heavy object over the creases to straighten out the plastic.